We do not have just the tabletop available for the Octagonal Boat Table # 315-DSI-KS. The only way to get the top is with the whole # 315-DSI-KS set. view full answer...
The flush mount version of the Rectangular Boat Table # 315-DSH-KS that you referenced is actually part # 315-DSH-KF on our site so that's what you'll want to order instead.
Attached is a review video for you to check out. view full answer...
I went out in the warehouse and pulled the Redline Grease Seal, part # 13194. It does have the markings on the inside of the seal that say TCM 13194 TM Taiwan and the number 11. It also has the spring around the inside lip. This seal will work for your boat trailer application. view full answer...
If you are wanting to add brakes to your trailer, the correct way to to it would be to remove the 4-pole connector and install a 7-way harness/plug like part # H20046. You would use a junction box like part # 38656, and some 10 gauge wire like part # 10-1-1 to run the brake output circuit from the junction box to the brake assemblies. Each brake magnet will have two wires exiting it. One wire will ground to the trailer frame, the other will attach to the brake output circuit. The junction... view full answer...